Our Products

Grinding Vice

Product Code : GV

Product Specification

Tool Makers Vices are combination of precision and art . Tool Makers vices are manufactured from special tool steel. These solid one piece vices are fully hardened (55-60 HRC) and tempered to ensure stability and durability. All vice surfaces are precision ground. Due to their precise accuracy these vices are mainly used in tool manufacturing, on grinding machine, milling machine and for inspection purpose also. In Screw Less Grinding Vices the rapid Positioning notches allow the vice to be locked in any position by Allen key.

 

Sizes
(Inch
Jaw Width
(inch/mm)
Jaw Opening
(inch/mm
Jaw Depth
(mm
Weight
(kg)
Outer Max. Dimension
(LXWXH)
(mm

  

Screw Less
(GV)
2"
2"/50
75
25
1.7
152X52X52
3"
3"/75
95
35
4.1
180X74X64
4"
3.75"/95
120
40
5.25
200X95X70

 

Grinding Vice (Screw type)

Product Code : GVST

Product Specification

Tool Makers Vices are combination of precision and art and is expert best love. Tool Makers vices are manufactured from special tool steel. These solid one piece vices are fully hardened (55-60 HRC) and tempered to ensure stability and durability. All vice surfaces are precision ground. Due to their precise accuracy these vices are mainly used in tool manufacturing, on grinding machine, milling machine and for inspection purpose also. In Screw type Grinding Vices clamping and releasing is through a threaded spindle with precision cut square threads for smooth operation.

 

Specifications
Sizes
(Inch
Jaw Width
(inch/mm)
Jaw Opening
(inch/mm
Jaw Depth
(mm
Weight
(kg)
Outer Max. Dimension
(LXWXH)
(mm

 

Screw Type
(GVS)
3"
2.75"/75
3"/75
40
5
243X70X70
4"
3.9"/98
3.5"/90
45
7.7
267X98X75

 

Sine Vice

Product Code : SNV

Product Specification
Sine Vices are manufactured from selected tool steel. These solid Sine Vices are fully hardened (55-60 HRC) and tempered and mounted on to a precision hinged bottom plate. 

These are very useful for manufacturing processes that require the highest standards of clamping accuracy at desired angles.

A minute angle step allows very small angles to be set with ease using standard gauge blocks.

These Sine Vices are available in two models:

 

Specifications
Jaw Width
Jaw Opening
Jaw Depth
SNV/150
SNV/175
70mm
95mm
95mm
120mm
35mm
40mm
 

 

Sine Vice (Screw type)

Product Code : SNVH

Product Specification

 

FEATURES / USES
Sine Vice Screw Type is a Screw type version of precision Sine Vice Screw type design is more convenient to use for the operator.

  • Hardened & Tempered.
  • All side Parallelism & Squareness within ± 0.005 mm.
  • Centre distance of rollers within ± 0.005 mm.
  • A recess of exactly 2 mm depth is provided on rest plate for setting up of very small angles with standard gauge blocks.

Chart for setting sine angle with the help of Gauge blocks is provided.

 

Specifications
Jaw Width
Jaw Opening
Jaw Depth
   
SNV/175
SNV/200
70mm
95mm
75mm
95mm
40mm
45mm

 

Sine Magnetic Table

Product Code : SMT

Product Specification
 Magnetic Sine Table are designed for accurate holding
of work pieces at desired angles. These are made from hardened and precision ground tool steel.
Provided with powerful permanent magnetic chuck for holding of work pieces
Rigid strap clamp for locking, that always remains below the top surface
Front roller diameter is reduced at both ends to provide a relife for minute angle adjustments
Hardened and ground side plates are provided for supporting the work piece and can also be used as a reference point
 
Specifications
Base Size(mm)L X W
Roller Distance (mm)
Relief Depth  (mm)
Parallelism (mm)
Angular adjustment
Overall height (mm)
 Magnetic Sine Table
( MST)
150x150
125
5
0.010
0-60 degree
95

 

Sine Angle plate

Product Code : SAP

Product Specification

Sine Table:-

Sine Table are designed for accurate holding
of work pieces at desired angles. These are made from hardened and precision ground tool steel.
M6x1 Tapped holes are provided on the top plate for clamping
of job. Rigid strap clamp for locking, that always remains below the top surface
Base plate is provided with relief for minute angle adjustments.
Hardened and ground side plates are provided for supporting
 the work piece and can also be used as a reference point .

(Also availiable in range of 100x100 to 300x300.)

 

Specifications
Base Size(mm) L X W
Roller Distance (mm)
Relief Depth  (mm)
Parallelism (mm)
Angular adjustment
Overall height (mm)
Sine Table
(ST)
150x150
125
1
0.010
0-60 degree
46

 

Stepped Angle Plate

Product Code : SAP

Product Specification

Stepped Angle Plates are manufactured from a single piece of hardened tool steel. These angle plates are precision ground, square and parallel.

 

Specification
Size
( Inches)
Tapped Holes Threads
Stepped Angle Plates
(SAP)
3”X3”X3”
1/4 “ BSW
4”X4”X4”
5/16” BSW

 

Drill Vice

Product Code : UG

Product Specification

 We offer our clients high standard drill vices, which are used for the purpose of drilling fastening holes. Precisely fabricated from alloy steel, these drill vices are ideal for grinding, light milling and drilling processes. Our drill vices are available in standard as well as standards sizes, dimensions and other specifications detailed by clients.

 

Specifications
Sizes
(Inch
Jaw Width
(inch/mm)
Jaw Opening
(inch/mm
Jaw Depth
(mm
Weight
(kg)
Outer Max. Dimension
(LXWXH)
(mm
Drilling Vices
(UG)
4”
4”/100
3.6”/92
30
4.1
290X154X63
5”
5”/120
4.4”/112
30
4.6
340X180X64

 

Angular Machine Vice

Product Code : AMV4

Product Specification

The Angular Milling Machine vices are used in tool rooms. It can also be used in Jig Boring and Shaping jobs. Angular Milling Machine Vices are manufactured from Graded High Tensile Cast Iron. Jaws of Vice are made from fully hardened and Ground tool steel-50 HRC. The Work Piece to be held dead square without packing. Fasteners High Tensile, Grade 10.8 fasteners. The 360 degree swivel Base allows vice to be set at any angle along the vertical axis. A milled slot in the vice base allows for accurate location of the vice on the machine table by using rectangular locating nuts In Angular Milling Machine Vices, angle can be set to any desire angle 45 degrees on either side Overall Accuracy of Vice + 30 Microns.

  

Specifications
Sizes
(Inch)
Jaw Width
(inch/mm)
Jaw Opening
(inch/mm)
Jaw Depth
(mm)
Weight
(kg)
Outer Max. Dimension
(LXWXH)
(mm
Angular Milling machine Vice
(AMV)
2”
2”/50
2/51
24
4
210X104X92
3”
3”/75
3”/75
34

 

275X131X58
4”
4”/100
4/102
38
18
356X175X147
6”
6”/150
6/152
49
43
380X235X193

Our Products